66 Crack 'OOOO' Lack

[Getbored Designs]

well this has been a long time in the making
dustin travis and i have been working on this periodically for about 2 years now.. but now its back in the shop
the car did not make it out last year...... for its deadline
but will be out sometime this year
everything is being touched except for the motor/engine bay

the car has been fully bagged for years
and was we painted it about 4 years ago
now its time to make it nice
cut out all the rust and start fresh
dustin plans on having this car forever

the many rims of the cadi

17" smoothies....

http://a785.ac-images.myspacecdn.com/images01/108/l_2297d9ba98fb22a2a9ac4f3668dca498.jpg

there was something in between this but im not sure what
maybe dustin can chime in

then

22" wires....

http://a364.ac-images.myspacecdn.com/images01/37/l_1bca5073148328778fe8eed2db6b9303.jpg

then to the present
20" smoothies

http://a973.ac-images.myspacecdn.com/images01/124/l_bad5ec6faab2339350dd8eb543c56484.jpg
http://a880.ac-images.myspacecdn.com/images01/69/l_e100129023b1ea38c4eed58a561f8c7f.jpg
http://a810.ac-images.myspacecdn.com/images01/8/l_736384b862a6b43f332749604af1a9d1.jpg

now for the good stuff
like i said before all the rust was cut out and replaced with new metal
along with the floor pans
and trunk
all the chrome was sent out for re chroming and is complete


http://a884.ac-images.myspacecdn.com/images01/22/l_143c34247c79328a53fc652ac59b935b.jpg
http://a70.ac-images.myspacecdn.com/images01/127/l_0a9a21d72a0c88e68ebe0fbe2a5cb9ed.jpg
http://a561.ac-images.myspacecdn.com/images01/11/l_2926b1c113835da1344680a6b564f1b8.jpg
http://a504.ac-images.myspacecdn.com/images01/18/l_f39e5530b51ba1298d1058cdbd156b2f.jpg
http://a313.ac-images.myspacecdn.com/images01/122/l_7b6c9678c095c3258eb134226d280bf8.jpg

[Getbored Designs]

http://a842.ac-images.myspacecdn.com/images01/117/l_21435b87fb02047384adeeff232f5dc1.jpg

the car never really laid out so now we are attending to that
the front needed some trimming
new lower bag plates
and later we are going to raise the motor an inch and section the engine crossmember
right now im trying to talk him into bodydropping it and rolling the pinch!!!!!

http://a851.ac-images.myspacecdn.com/images01/45/l_927309f06be2f640333db26560b1d6c2.jpg
http://a743.ac-images.myspacecdn.com/images01/12/l_75c6575deccafb812c1c94f3466ae506.jpg

a four link for the rear is in progress
more on that later

now to the single hinge rear suicide doors

http://a785.ac-images.myspacecdn.com/images01/110/l_0cf3bef9b55fef9bf4899a6a72737028.jpg
http://a4.ac-images.myspacecdn.com/images01/54/l_bf9a61843d58d1239f0510d1f13cb23b.jpg
http://a343.ac-images.myspacecdn.com/images01/102/l_45bbace99fd2410122f2b2fbfcd46606.jpg
http://a345.ac-images.myspacecdn.com/images01/47/l_49d51b6e480e48c4d2fb49f9c91c0958.jpg
http://a511.ac-images.myspacecdn.com/images01/70/l_7d2304329357fb3f2a9baf7f2e83e39e.jpg

now to the interior
the interior is getting a killer stereo install
and the seats and headliner were totally re done

http://a757.ac-images.myspacecdn.com/images01/96/l_f43fc233d3fb45552bdfb9ffea9842e4.jpg
http://a791.ac-images.myspacecdn.com/images01/92/l_ddf57f0c8ffb74a9ca6c35f8535a6916.jpg

[Getbored Designs]

http://a790.ac-images.myspacecdn.com/images01/81/l_98e50ffc77cd4697cb88df0b3bc6b0e5.jpg
http://a529.ac-images.myspacecdn.com/images01/26/l_d80605579f89338e06ccaf5f606a0a98.jpg
http://a723.ac-images.myspacecdn.com/images01/125/l_e7ead0f8c0cc5a0430d68d6d2c80dcca.jpg

parts installed for test fit and primed

http://a419.ac-images.myspacecdn.com/images01/120/l_3d09678cf02d68a04f166bcb6e0bb98a.jpg
http://a603.ac-images.myspacecdn.com/images01/73/l_70bc8e59eb364d640d9a179799c2d592.jpg

rear deck fitted with a set of separates and 4 ports for the sub enclosure

http://a618.ac-images.myspacecdn.com/images01/76/l_a609227ca117dbc4c580dc5c169da8a1.jpg
http://a66.ac-images.myspacecdn.com/images01/57/l_ccd8c1be9fe9db1355a6627480f535b1.jpg
http://a225.ac-images.myspacecdn.com/images01/126/l_a9916e41830d257f294a46b2aa6bbe48.jpg

some trunk side panels being fitted by shady

http://a32.ac-images.myspacecdn.com/images01/30/l_a0146f0ce647cc6afceb71688a78e0cf.jpg

thats all for now perdy much up to date
more updates as it progresses

[Getbored Designs]

four link was made and installed
and dustin was hard at work cleaning off the firewall
and getting the body ready to remove

http://a18.ac-images.myspacecdn.com/images01/56/l_6bd0c1c2f90d6c04948b5608dc0d2109.jpg
http://a329.ac-images.myspacecdn.com/images01/6/l_3ea0dd4ebf51440b885a78a2629c1c70.jpg

a little over an inch to lay rocker Not pinch!
http://a694.ac-images.myspacecdn.com/images01/92/l_41718ce3fa37f88f657ce3c5e88ad2ed.jpg
more tomorrow

[Getbored Designs]

body was completely lifted off this weekend
we assessed the situation
and decided to go ahead and stock floor it

soooooo

everything was removed again for like the 80th time
and the trans tunnel was cut out along with the firewall which will be smoothed

http://a151.ac-images.myspacecdn.com/images01/66/l_b0c2862b083608ce31f53c25d3e9d93e.jpg
http://a414.ac-images.myspacecdn.com/images01/112/l_15cd30c396cd6110a0691ddb821e652d.jpg

laying pinch now....
laying rocker this week!

http://a72.ac-images.myspacecdn.com/images01/30/l_506f2068f176caaaae9f1437a5a2b067.jpg

[Oldcar_Mechanic]

Nice work

Ron

[Getbored Designs]

we have changed our minds
car is up in the air
awaiting the donk chassis !!!!!

http://a308.ac-images.myspacecdn.com/images01/40/l_b66339815839430964ee387ccc2c2b7b.jpg

hidious pinch is rolled

http://a749.ac-images.myspacecdn.com/images01/95/l_d835896a4de95d0ff138bfe8034857ec.jpg

[Getbored Designs]

well the car is officially tore the fck down

i guess you could say this is the redneck way to remove the frame

http://a814.ac-images.myspacecdn.com/images01/58/l_cdd17ecb7fbf35241577ae79f707a635.jpg

and the chassis is underway

http://a160.ac-images.myspacecdn.com/images01/68/l_a65d8b82930d0d02c24e19c4244cd137.jpg

wacky ass four link
and hideous -18 deg pinion angle at ride height

http://a6.ac-images.myspacecdn.com/images01/86/l_5b31a696beb59b1e10dce03cc33eb045.jpg

cross member cut out
new upper 4 link tabs which set the pinion at -3 at ride height and only changes 5 deg throughout the entire suspension travel
and the frame was notched with 3/8" plate
not the prettiest notch but it is strong and will work
there is no room under this car.....

http://a80.ac-images.myspacecdn.com/images01/6/l_b15b5beb0e179cc0beb93bddfb1678bf.jpg

passenger frame is cut and ready to be plated with 1/4"
the whole frame is made from 1/8"
and there are no crossmembers (stock)
because with the body drop the rear floor pans are 1/4" off the ground....

http://a113.ac-images.myspacecdn.com/images01/72/l_483f804718fc5fe2ada0f076a4050df0.jpg