clutch and brake pedals controls

[bartibog1]

trying to hook up brake and clutch control mechanics and do not have a schematic showing all the parts, does anyone have one that could be e mailed? parts book shows for jet only. mine is a 5C. it appears to be missing a bushing in the side of the bell housing clutch pedal shaft goes tothanks steve

[mars55]

Here is a schematic of the pedal assembly for stepdowns.

http://www.classiccar.com/files/PEDAL_ASSY0001.JPG

[Heart_Of_Texas]

J2-18 is a rubber sleeve that cushions and connects the clutch linkage to the linkage mounted to the bell housing. In the past I have reinforced rubber hose cut to fit to make this bushing.

Good luck

[RL Chilton]

This thread sounds vaguely familiar . . .:rolleyes:

[Billy K.TN.]

There is bushings in the bell housing that J2-15 goes in. They were worn bad in my 47 PU.